Kanthal: resistive wire for all tests

Sommaire

Of all the models and types of resistive wires , Kanthal has taken an important place in the field of rebuildable atomizers! Very varied, very convenient, this "standard" of the electronic cigarette adapts perfectly to the handicrafts of resistance on all levels. Whether you are a lover of flavors and tastes, whether you like hybrid tails, or a power vaping enthusiast, the kanthal meets all your requirements with amazing handling.

Obviously this is not the must of resistive son, in truth there is none, since each configuration, each material, each assembly negotiates a thread differently. But what is exhilarating is the ability of the kanthal to adapt to the various editing models we want to perform. That being said, it can not be perfect either because this alloy has some (rare) defects in certain points, from a certain diameter, and some exposure to heat. It is not therefore a question of blindly praising the virtues of the Kanthal but to review this famous resistive thread!

A few words on the material

Ultimately, the kanthal is not a basic chemical element, it is rather a Swedish brand of a metal alloy with unequal proportions of 20 to 30 percent chromium, 4 to 8 percent aluminum and an iron base (Different according to gender A, D). The choice of these elements lies in their ability to withstand high temperature and malleability.

In the world of the vape, the kanthal appeared as the "hybrid" thread that adapts to all models without going towards perfectionism. The new handyman will instinctively install this wire for its first rebuildable. The professional will choose the kanthal for reasons of ergonomics, sharing and stability.

Available in several diameters, the design of the kanthal for resistance has been carefully thought out and it currently has the largest number of sizes in terms of resistive wire. Each of these sizes is assigned specific configurations and installations that optimize the heating according to the quality of the requested vape. Ranging from the thinnest to the thickest, all mods are compatible with this thread, whether you are in electro or mechanics.

The kanthal in all its states!

In order to understand this great standard, we will proceed to a small questionnaire which consists in presenting the properties of the kanthal as well as its use in real situation. To do this, we will take the diametric variations one by one by putting them in situation following the basic questions of the QCP: When? How? Why

Above all, it should be known that the kanthal is a wire presented in several categories (A1, A and D) of various diameters for various needs but also in different shapes (flat or round) for the heating surface and ease of assembly . Let's start!

The A1 0.2 mm

Q: When you want a big resistivity but also when you just start tinkering with your coils. It is a size that is often reserved for those who have little taste for slap and hit.

C: We can use the 0.2 mm the way we want, the shape we want, either with a large heating surface, with many turns, or in braids to feel the steam while being focused at taste.

P: The 0.2 mm is particularly used for its small size, its malleability and its great resistance. It should be noted, however, that with the resistivity / length ratio, the value of the resistor can be reduced with a longer coil length: another good news! The longer the wire is, the more the heating surface will be large and fast (aggressive).

The A1 0.3 mm

Q: Not very different from the A1 0.2 mm, this size is a small change in the speed of heating without going too strongly. It is better to use the 0.3mm when you want to enjoy the taste and flavor of the vape san

C: In single clapton or Twisted, the 0.3 responds to amazing malleability! For those seeking a more or less structured assembly with a double resistance, it is the perfect diameter.

P: Because it is fine, offering good resistivity and easy handling. It differs from its 0.2 per stiffer size that allows the lock to be more stable but more airy, so a good capillarity for a better quality of vaporization.

The A1 0.4 mm

Q: Shared, it is the size used by the less handymen because of its lack of pronunciation. A time not tasty enough, time enough striking is the standard of new vapoteurs who want to make a good coil, nothing more.

C: By its size which increases, the A1 0,4 allows more the electric intensity to pass in force. The resistance gains heating but requires a heavier assembly. We must therefore use it in an environment with several turns and parallel if possible to feel good flavors.

P: Simply because it represents the best compromise between flavors and steam. Although no insistence between the two is marked, however, note the longevity of the coil with this economy-oriented diameter.

The A1 0.5 mm

Q: We enter here into a context based on experimentation, the search for a particular effect. We choose this diameter especially by its low resistivity, so very responsive to heating, offering greater steam and speed above average.

C: Very rigid, it must be mounted with special tools, heating it a little with a blowtorch. It offers good performances but does not categorize itself yet in subohm. Rather open to power vaping, it must be mounted in double or triple coil for a well-distributed surface.

P: The choice of a 0.5 is explained by a particular tendency to heat, steam at the expense of taste. Not powerful enough, however, this size allows a certain aggressiveness but holds very well in the face of heat, and allows a longer life compared to other materials of this size

The 0.6mm A1

Q: When you're hungry for vape, you can not do without a 0.6mm fixture. Specifically, it is rarely used because of its super rigidity which has difficulty in obeying the turns but satisfies its owner once mounted.

C: It takes some ergonomics and a lot of space to mount the A1 0.6 mm! Very rebellious, the diameter proposed here is remarkable for its indomitable behavior. It will take large clamps to hold it in play, and editing is rarely done in several coils because of its thickness.

P: Why such a thickness? For the feel and density of the vape. Thanks to the great flexibility of materials that are combined in the kanthal, the heating is fast, high but not dangerous. The 0.6mm kanthal, at about 0.4 ohms, is the must for subohm lovers who want to keep their accessories safe while allowing small fantasies.

How to choose ?

With the ratio of resistivity by diameter, the choice to opt for a thinner or thicker size comes down to the flavor, the taste, the hit, the vape sought by the handyman. Knowing that a higher resistance designates a thinner wire, it would be necessary to pay attention to assemblies too lean since the material (even reputed solid) risks to melt beyond a certain intensity. It is the same for thicker, which allow a brutal and immediate heating but can quickly wear the accumulator.

With the data that has been provided, each configuration is immune from bad behavior and thus requires special diligence in the absence of experience. To add some success in your editing from kanthal, measure all the sensitive points be it the size (finer so more fragile), the shape (simple for the thickest and vice versa), and the resistivity that takes in count both.

Kanthal and other resistive threads

If one benchmarks the Kanthal, one will judge it rather as the most sober, neither too powerful, nor too conservative. Compared to this sobriety, we find the most expressive like nichrome and nickel which are very reactive and very turbulent because of their electrical property. The kanthal is usually chosen for a compromise between sensation and longevity unlike the nickels and titanium that give this impression of vigorous slap offering superb performance and a very pronounced taste. Stations at hot spots though! Each consumer will then trust his need and choose the resistive wire according to his mode of vape.